|
Universal board for moneychanger
Main Characteristics:
The Board ASD234A uses a powerful electronics at microprocessor which guarantees a very good level of performances and an elevated immunity to electrical disturbs. Any attempt ofviolation or modification of the values indicated in the specifications should cause the block of theboard. The software has been optimized to make simple the interface with the user and it can bepersonalize on request of the customer. The board includes a connector for the connection with the display and a set of connectors for
the wiring. Power 12 Vdc (+/- 10%)
Absortion o 200 mA ( board at LCD backlighting)
o 190/500 mA for the banknotes reader
respectively in the way at rest and during the recognition
o 50mA/500mA for the electronic token dispenser respectively in the way at rest and during the recognition
Dimensions 125 x 97 mm
Operating environmental conditions -10 + 40 °C 90% U.R.
Banknotes Reader Interface Impulsive and parallel way. Signal of inhibition.All the outputs of the reader must be opencollector
Token Dispenser Interface Impulsive and parallel way. Signal of inhibition.All the outputs of the reader must be opencollector
Hopper Interface Impulsive output for motor control. Inputs:
sensor for confirmation of the distribution,signalling failure or block, signalling minimum oftokens
Auxiliary Interface Utilizable to expand the field of the boardemployment LCD Interface Controller KS0066 (or the equivalent ones) 16
car. x 2 lines , backlighted
|
